Used Cushion Tire Forklift Mexico - Most forklifts are classified by the kind of work they do and some are classified by their type of tires. The two types of tire classification for forklifts are:
1. Cushion; and
2. Pneumatic.
It is vital to note that there are benefits and drawbacks to both types of forklift tires; cushion and pneumatic. The benefits and potential drawbacks of the cushion tire models can only be compared when the pneumatic benefits and drawbacks are equally discussed.
Forklift Tire Classifications
Cushion Tires
Cushion tires are comprised of treaded or smooth, solid rubber which is positioned around and affixed to a metal ring or baseband. Cushion tires cost less to make and are easier to take care of. This type of tire is made to work on smooth surfaces such as indoor concrete floors and loading docks. These tires are designed to maneuver well within tight locations, due to their specific turning radius. Cushion tires enable the forklift to be situated closer to the ground, increasing the vertical clearance in comparison to other models that rely on pneumatic tires. It is important to note that cushion tires do not offer as much traction compared to pneumatic models and this is noticeable on wet locations and outdoor surfaces.
There are many jobs suitable for cushion tire forklifts such as unloading shipments, transporting items to and from the loading areas, order picking, unloading inventory and more.
Pneumatic Tires
Pneumatic tires, on the other hand, are primarily designed to operate in rougher terrain, with uneven surfaces. These tires have two categorizations:
The difference between these two pneumatic categories is that the first is made entirely of rubber, while the latter is a layered rubber, filled with air.
Pneumatic tire forklifts are good options for work that takes place outdoors on unpaved ground. Solid resilient pneumatic forklifts are a better option in areas that may have objects which could puncture a standard air pneumatic, such as junkyards, lumber yards and the like which may have sharp metal objects.
Benefits of Cushion Tire Forklifts
Forklifts that use cushion tires are a wise option for interior and exterior locations that feature smooth surfaces. The majority of forklifts that rely on cushion tires are used mostly indoors with limited outdoor use. They are often designed for use in areas such as manufacturing plants and warehouses. Warehousing and narrow aisles and tight locations all rely on the benefits of cushion tire forklifts.
Some benefits of using a cushion tire forklift over a pneumatic tire forklift are:
1) Maneuverability
Most cushion tire forklifts intended for indoor use are electric, which means they are usually smaller and more maneuverable because they do not required the extra room needed to accommodate the larger internal combustion engine.
2) Lower Clearance
Indoor forklift models that use cushion tires feature lower clearance compared to pneumatic tire models. This enables the machine to travel through doors and navigate obstacles such as sprinkler systems ad lights much easier.
3) Durability
Cushion tires for forklifts are durable, easy to maintain and have little to no risk of puncture.
4) Quiet
Most cushion tire forklift models use a fuel cell or battery as opposed to an internal combustion engine and are much quieter compared to their diesel or propane counterparts.
5) Environmentally Friendly
Cushion tire forklifts are more environmentally friendly as they use electricity and produce no harmful emissions, compared to internal combustion engine models.
Forklift Tire Choice
The forklift frame typically depicts whether a cushion tire or a pneumatic tire will be utilized. The forklifts’ lifting capacity and frame are specific to the axles and tires in the design. The majority of forklift manufacturers create models to coincide with specific wheels and tires, usually cushion tires or pneumatic tires. Instead of trying to modify the forklift by picking the correct tire for a particular application, it is wiser to choose the forklift that will best suit the job at hand.
Workplace Applications
Suitable Work Applications for Cushion Tires
Cushion tire forklifts are popular for a variety of job sites. If the majority of the load lifting, transporting and placing will occur indoors or with only moderate outdoor usage on smooth surfaces, then cushion tires are likely the best option.
Sitting closer to the ground, cushion tire forklifts have a tinier frame compared to pneumatic tire forklifts. This gives them better clearance for fitting through doorways and avoiding overhead obstacles. Although, cushion tire forklifts offer less ground clearance, this can cause damage to outdoor obstacles when the surface is uneven or unclear. One solution to this problem is to fit the cushion tire forklift with traction tires on the front of their forklifts. Traction based tires will function in rough terrain environments that have wet surfaces, packed gravel and asphalt. These tires are not recommended for travelling on grass or dirt. Traction tires are utilized on the opposite sides, the steer and drive axles.
One of the largest advantages of using a forklift with cushion tires is the smaller turning radius. Their ability to work in compact locations makes cushion tire forklifts excellent for warehousing and manufacturing operations. Warehouses that utilize a narrow aisle layout will especially benefit from the smaller turning radius of cushion tire forklifts. Cushion tire forklifts are also less expensive and are more readily available than pneumatic tire forklifts.
Suitable Work Applications for Pneumatic Tire Forklifts
Since pneumatic tires contain air, these forklifts are better suited for exterior applications. Some interior locations may utilize pneumatic tire forklifts; however, they do not offer a small turning radius or the lower clearance and maneuverability that the cushion tires provide. Pneumatic tire models create harsh fumes with their internal combustion engines, making them unsuitable for interior locations. Pneumatic tire forklifts are longer and wider than cushion tire forklifts which is why they are primarily used outdoors.
Of the two types of pneumatic tires, the solid pneumatic tire is more expensive than the air pneumatic tire. This is because a solid pneumatic tire is not susceptible to punctures or gouges because they are made of solid rubber and do not have air in them. These solid pneumatic tires are best for scrap yards and lumber yards where the possibility of running over sharp metal scrap and debris, such as nails, in greatly increased. Air pneumatic tires work great outside on gravel and asphalt applications. The main issue with air pneumatic tires is their ability to become gouged or punctured. It is essential to ensure the work site is free from any sharp materials before using a forklift with air pneumatic tires. Operator fatigue and discomfort can be traced to the bounciness of air-filled tires. It is possible to foam fill the pneumatic forklift tires for a smoother ride. Much less bouncy than air-filled pneumatic tires, the solid pneumatic forklift tires provide the operator with a smoother ride. Foam filling is also used to help prevent flat tires. It is necessary to plan for enough time when foam filling an air pneumatic tire as it can take up to 3 days to fill and cure properly.
Difference in Load Capacity
The load capacity on for pneumatic tire forklifts and cushion tire forklifts are fairly equal. Some electric powered cushion tire forklifts do have lift limits. There are numerous forklifts available and a variety of pneumatic and cushion tire models can be found in a variety of load capacities. There are numerous load capacities ranging from less than 2000 pounds to more than 200,000 pounds.
Cushion Tire Forklift PDF
